SLC LogiQ LED Driver CV 12VDC 40W 2CH
incl. VAT
See document archive
SKU: S37010
Stock:
| Technical data | |
|---|---|
| CE | Yes |
| Exterior color | White |
| Operating temperature | -20°C ~ +45°C °C |
| Protection class | II |
| Housing | Plastic housing |
| Degree of protection (IP) | IP20 |
| Suitable for constant voltage | Yes |
| Input | |
|---|---|
| Electrical connection (Input) | L`N screw connection |
| Power factor | 0.95 |
| Output | |
|---|---|
| Output power | 1.0 - 40.0 W |
| Output voltage | 12.0 - 12.0 V |
| Installation | |
|---|---|
| Length | 144 mm |
| Height | 36 mm |
| Width | 84 mm |
| Model | Dynamic |
| logistics data | |
|---|---|
| Brand | SLC |
• 40W independent LED driver with full isolated design.
• Supplied with terminal cover and cable retainer.
• 100-277VAC wide input, 2 channels 12V constant voltage output.
• The innovative plug-in control module, easy assembly and disassembly.
• Work with multiple modules: DALI (DT6/DT8), DMX/RDM, RF, 1-10V, ZigBee, Z-Wave.
• Standby power consumption <0.5W.
• 1500Hz PWM frequency, smooth and deep dimming to 0.1%, flicker-free, no noise.
• Built-in active PFC function.
• Class Ⅱ protection against electric shock for direct or indirect contact.
• Protections: short circuits, over-temperature, over-voltage.
• To protect load against overheating when working with an external thermistor.
• Suitable for use on normally flammable surfaces.
• 5 years warranty (3% failure rate).
• Supplied with terminal cover and cable retainer.
• 100-277VAC wide input, 2 channels 12V constant voltage output.
• The innovative plug-in control module, easy assembly and disassembly.
• Work with multiple modules: DALI (DT6/DT8), DMX/RDM, RF, 1-10V, ZigBee, Z-Wave.
• Standby power consumption <0.5W.
• 1500Hz PWM frequency, smooth and deep dimming to 0.1%, flicker-free, no noise.
• Built-in active PFC function.
• Class Ⅱ protection against electric shock for direct or indirect contact.
• Protections: short circuits, over-temperature, over-voltage.
• To protect load against overheating when working with an external thermistor.
• Suitable for use on normally flammable surfaces.
• 5 years warranty (3% failure rate).
