To top

The One Downlights


One Downlight for all applications

We developed the One downlight series with the ambition to make One downlight that will be suitable for all rehab and new installations that requires downlights. The result is our One Series. A high-quality downlight that fits cut-out holes from 68 mm to 83 mm. Can be installed outside as well as inside and is very flexible with the use of our special made accessories.




Quick and easy installation

We have always been thinking about electricians when developing our products. Focusing on solutions which is practical and easy for the installer. One 360º and OneSoft comes with a quick connector between the downlight and driver so you can easily detach the downlight from the driver. We also use quick connection boxes with strain relief and connection for tubes.


No need for traditional Downlight box

You can install the One Series into the insulation up to the moisture barrier without worrying about overheating. The downlights are designed for this purpose. This makes the downlights perfect for rehab projects and is time-saving on new projects. 


Flexible Cut-out holes

The One series is designed to fit in a wide range of cut-out holes from 68 mm to 83 mm. We have solved this with a wide diameter on the outer ring and we also include a removable extension ring to stabilize the downlight in bigger cut-out holes. If your project needs to cover bigger existing holes we can offer the SLC One360/OneSoft Extension Bezel that covers cut out holes up to 110mm diameter. 


Use it outside!

The One series is developed for outside use as well as inside use. As long as us install the downlights under a ceiling and the drivers stay dry you can install the downlight outside. Note: We don’t recommend to install the Aluminium version outside because of corrosion. 


One Series in Dim To Warm

Dim to warm technology makes the light behave just like regular incandescent lamps when dimmed. This is solved by using two LED chips with different CCT that are adjusted as you dim the light. This way you can experience the cosy effect of traditional incandescent lamps while using LED.


One360 - Tilt and rotate

The One360° can be tilted 30° and rotated 360° makes it perfect for illuminating pictures on the wall or to be used in angled ceilings or stairways. The tilt and rotate functions are also practical if you want to turn the direction of the beam at any point. 

Product features

• SLC One 360° for both new and rehab projects
• CRI>90
• MacAdam 3
• Up to 715 lumen output 
• Can be installed into the insulation, up to the moisture barrier 
• No installation box required
• Tiltable 30° in all directions (360°) 
• *Suitable for outdoor installation
• Quick Connection: Loop in/loop out
• 16 mm Cable/Tube connection

image

image

image

Available colors

See our product pages for a full technical description

Go to products >>


OneSoft - Recessed LED / Low Glare

The OneSoft has all the benefits as the One360° but also has a deep recessed LED chip that reduces glare. The OneSoft can also be used together with our DecoBox and DecoRing to reduce glare even more. 

image

Product feautres

• SLC One Soft for new and rehab projects
• CRI>90
• MacAdam 3
• Up to 715 lumen output 
• Low Glare / Deep Recessed
• Can be installed into the insulation, up to the moisture barrier 
• No installation box required
• Suitable for outdoor use
• Quick Connection: Loop in/loop out
• 16 mm Cable/Tube connection

image

image

image

Available colors

See our product pages for a full technical description

Go to products >>



Book an online meeting with us

We are happy to have an online meeting with you on Skype for Business, click on the link below to book your session. 

Click here to book your meeting >>