To top

Qi Eco Downlight R76 TED

See variants

See document archive
dr_QuickInstall
Number Name Price Stock
Number3234451 NameQi Eco R76A LU 430TED 8527 IP44 36° Price

incl. VAT

Stock
See variant
Number3234450 NameQi Eco R76 WH 430TED 8527 IP44 36° Price

incl. VAT

Stock
See variant
Number3234453 NameQi Eco R76 WH 430TED 8530 IP44 36° Price

incl. VAT

Stock
See variant
Number3234454 NameQi Eco R76A LU 430TED 8530 IP44 36° Price

incl. VAT

Stock
See variant
Light technic
Beam angle 38 °, Medium beam 21-40° °
Colour rendering index (CRI/Ra) 85
Efficacy 70 lm/W
Luminous flux (lm) 420
Lamp efficacy 70 lm/W
Tilt-able 15 °
Reflector High-gloss
Colour rendering index CRI 80-89
Lamp type LED not exchangeable
Light outlet Direct
Light sharing Symmetric
With light source Yes
Colour of light White
Luminous flux 430 - 430 lm
Rated life time L70/B50 at 25 °C 50000 Hours
Colour consistency (McAdam ellipse) SDCM3
Light distributor Refractor lens
Energy efficiency class of the built-in lamp A++, A+, A (LED)
Technical data
Protection class II
Surface protection Powder coating
Suitable for lamp power 6 - 6
Type of control gear Electronic transformer
Material housing Aluminium
Material cover Plastic, transparent
Degree of protection (IP) IP44
Control gear included Yes
Max. system power 8 W
Adjustability Swivelling
Rated ambient temperature according to IEC62722-2-1 -20 - 40 °C
Dimming phase cut-off Yes
Dimming method Trailing edge
Input
Strain relief Yes
Nominal voltage 220 - 240 V
Voltage type AC/DC
Output
LED nominal current at constant current 110 - 110 mA
Installation
Cut-out hole (Ø) 76 mm
Height/depth 40.5 mm
Built-in width 70 mm
Built-in height/depth 32 mm
Length 88 mm
Built-in length 70 mm
Width 88 mm
Can be installed directly into the insulation Yes
Outer diameter 88 mm
Conductor cross section 0.35 mm2
Connection type Plug clamp
Built-in diameter 76 mm
Suitable for suspended mounting No
Number of poles 2
Suitable for wall mounting No
Suitable for built-in mounting Yes
Connectable conductor cross section 0.35 - 1.5 mm²
Type of wiring Suitable for through wiring
Suitable for ceiling mounting Yes
logistics data
Brand Quick Install
Imported by The Light Group
Ideal downlight for project - cut-out holes: 75 mm. This low-build (32mm) downlight can be mounted directly in insulation without a box. Perfect for rehabilitation / replacement of old downlights.