To top

SLC DMX512/SPI/RF Controller 5V CV 12-24V OLED

Smart controller with PSI output signal for controlling RGB or RGBW pixel LEDs. Can also be controlled with RF Remote Controls, DMX console or sequencing software. OLED display for easy programming directly on the device.

incl. VAT


See document archive
SKU: S26009
Stock:
Technical data
CE Yes
Exterior color White
Operating temperature -20°C ~ +45°C °C
Protection class II
Housing Plastic housing
Degree of protection (IP) IP20
Number of colour channels 512
Operating method DMX
Input
Input voltage 5.0 - 24.0 V
Output
Max. output current 0.2 A
Output voltage 5.0 - 24.0 V
Installation
Length 170 mm
Height 28 mm
Width 53.4 mm
Model Dynamic
Surface-mounted Yes
logistics data
Imported by The Light Group
Brand SLC
D-Pak
D-pack length 380 mm
D-pack weight 13600 g
D-pack height/diameter 280 mm
D-pack quantity 70 pcs
D-pack width 270 mm
F-Pak
F-pack width 53.4 mm
F-pack height 28 mm
F-pack weight 140 g
F-pack length 170 mm
M-Pak
M-pack weight 150 g
M-pack height 55 mm
M-pack width 33 mm
M-pack length 173 mm
Number 1
• SPI signal output for control of RGB/RGBW pixel lights
• DMX512 controllable and RF/WiFi remote controllable
• Capable of addressing up to 1020 pixels at the same time
• Addressing up to 170 RGB pixels or 128 RGBW pixels individually
• The built-in, backlit OLED panel allows for easy configuration of most settings
• Four push buttons available for control of the OLED functions
• Supports 38 types of driving IC
• RGB/RGBW colour order configurable
• 512 DMX decoding channels
• Support max. 3060 output channels configurable
• 35 built-in sequencing, chasing, changing and static colours under RF mode
• Compatible with a variety of RGB/RGBW RF remotes
• Works with PC interface DMX consoles and sequencing software

Input Voltage: DC5V/DC12-24V
Input Current: 0.2A Max.
Input Signal: RF/WiFi + DMX512
Output Signal: SPI
Radiofrequency: 869.5/916.5/434MHz
Driving Pixels: Max. 1020

SLC LED DRIVER DALI2 CC DIP300-750mA Max 28.5W

Supports DALI-2+PUSH dimming mode. DIP-switch can realise 10-level current output control. Soft dimming and flicker-free at any brightness. Using HPC patented technology, the current output between drivers is thesame at any dimming level. Dimming range 1-100%, output current accuracy 2%. Standby power input <0.5W, meets the requirements of ErP certification. High PF, high efficiency, low THD
SLC1198