To top

SLC SmartOne Zigbee to DALI DT8/1-10V Converter Mono/TW/RGB/RGB+TW

• Zigbee to DALI Converter that easily lets you integrate your DALI or 1-10V system against Zigbee• Zigbee to DALI or 1-10V signal converter• Mono, Tunable White, RGB and RGBW• DALI DT6: Mono dim• DALI DT8: TW, RGB, RGBW• Can address DALI addresses, DALI groups, and Broadcast• Switch for disconnecting• Built-in DALI power supply• Based on the latest Zigbee 3.0 protocol• Supports TouchLink communication with other Zigbeedevices

incl. VAT


See document archive
SKU: S24021
Stock:
Technical data
Exterior color White
Operating temperature -20°C ~ +45°C °C
Protection class II
Housing Plastic housing
Degree of protection (IP) IP20
Suitable for constant current Yes
Suitable for constant voltage Yes
Dimming 1-10 V Yes
Dimming DALI Yes
Dimming Zigbee Yes
Dimming interface PushDim
logistics data
Brand SLC
Imported by The Light Group
D-Pak
D-pack length 380 mm
D-pack width 270 mm
D-pack weight 8000 g
D-pack height/diameter 280 mm
D-pack quantity 100 pcs
M-Pak
M-pack length 132 mm
M-pack weight 70 g
M-pack height 45 mm
Number 1
M-pack width 25 mm
F-Pak
F-pack width 37 mm
F-pack weight 60 g
F-pack length 95 mm
F-pack height 20 mm
• Zigbee to DALI+0/1-10V 2 in 1 converter based on Zigbee 3.0
• Zigbee signal input, DALI signal output to DALI line or 0/1-10V signal output, 110-240VAC power input
• With max. 5A relay output and metering function
• Compatible with universal Zigbee gateway or hub products
• Can directly pair to a compatible ZigBee remote via Touchlink
• Compatible with universal Zigbee remotes
• Supports self-forming Zigbee network without a coordinator
• Supports find and bind mode to bind a ZigBee remote
• Supports Zigbee green power and can link max. 20 Zigbee green power remotes
• DALI signal or 1-10V signal output selectable by DIP switch
• Built-in DALI bus power supply, no extra DALI bus PS required
• With max. 50mA DALI bus power current output
• To supply control current to up to 25 DALI control gears
• DALI DT6 or DT8 device type selectable by DIP switch under DALI mode
• Color control according to DALI specifications of Device Type 8,
• Color type: Tc, XY coordinates, RGBW selectable by DIP switches
• DALI address control mode or group control mode selectable by DIP switch

SLC SmartOne Zigbee Remote Mono

• Remote control with three channels• Based on the latest Zigbee 3.0 protocol that supports Touchlink communication with Zigbee devices• Can control 3 units/groups• Possibility to program four scenes• Can be attached surface to wall• Battery-powered (CR2430)
S57007
 

SLC SmartOne Zigbee Wall Remote 1 x Mono

• Wireless wall switch with two buttons• Can be mounted surface-mounted on a wall• Based on the latest Zigbee 3.0 protocol which supports Touchlink communication with Zigbee devices• Can also be used as a mode switch with a hub• Battery-powered• Fits in 55x55 mm frame
S57001
 

SLC SmartOne Zigbee Wall Remote 4 x Mono

• Wireless wall switch with 8 buttons• Can be mounted surface-mounted on a wall• Based on the latest Zigbee 3.0 protocol• which supports Touchlink communication with Zigbee devices• Can also be used as a mode switch with hub• Battery powered• Fits in 55x55 mm frame
S57003