To top

SLC LED STRIP MONO CV 60 5M 8MM 4,8W 420LM 4000K CRI80 IP20

The SLC Basic is a low wattage LED-Strip (4,8W/m) and is suitable for visual decorative effects.

incl. VAT

Back to product variants

See document archive
SKU: S10003
Light technic
Beam angle 120 °, 120
Colour temperature 4000 K, 4000.0 - 4000.0 K
Colour rendering index (CRI/Ra) 80
Expected lifetime 60 000
Number of LED`s per meter 60
Light reduction L80B10
Type of light source LED
Efficacy 87.5 lm/W
Lumens pr. meter 420 lm
MacAdam (SDCM) 3
Colour rendering index CRI 80-89
Lamp type LED not exchangeable
Lamp power per meter 4.8 W/m
Number of nodes per meter 60 LED`s
Colour of light White
Luminous flux per meter 420 lm/m
Rated life time L70/B50 at 25 °C 120000 Hours
Lamp power per foot 1.44 W
Luminaire efficacy 87.5 lm/W
Number of nodes per foot 18
Technical data
Exterior color White
Cutting point, every 100 mm
Dimmable Yes
Dimming range 0-100% %
Input voltage 24 VDC
IP class IP20
LED-Strip length 5 m
Max length per connection: 5 meter m
Operating temperature -10°C ~ +45°C °C
Rated power per meter 4.8 W/m
Protection class II
Type of control gear LED operating device voltage-controlled
Suitable for dimmer Yes
Degree of protection (IP) IP20
Lamp voltage 24.0 - 24.0 V
Max. system power 24 W
Technology Constant voltage (CV)
Dimming method Pulse Width Modulation (PWM)
Electrical connection (Input) 2 meter wire in each end
Voltage type DC
Length of particular segments 100 mm
3M adhesive tape Yes
Height/depth 2 mm
Height 2 mm
Length 5000 mm, 5000 mm
Width 8 mm, 8 mm
Mounting method Surface mounting/recessed mounting
Model Strip
Conductor cross section 0.35 mm2
Connection type Solder
Self-adhesive Yes
Number of poles 2
With protective cover No
With connection set No
With end piece No
Type of wiring Ending
logistics data
Imported by The Light Group
Brand SLC
General data
GTIN 7070938055864
EPREL Energy Class F
The SLC Basic is a low wattage LED-Strip (4,8W/m) and is suitable for visual decorative effects. It can be used as background light on walls, inside shelves and niches. The 3M adhesive tape on the backside of the LED-Strips ensures easy and quick installation. Discover a wide range of colour temperatures and IP ratings.

SLC LogiQ LED Driver CV 12VDC 50W 2CH

LogiQ Constant Voltage 12V dimmable 2 channel driver for LED luminaries. Works with multiple control modules: DALI (DT6/DT8), DMX/RDM, RF, 1-10V, ZigBee, Z-Wave (see accessories or plugin modules).

SLC Power Supply 60W 24V CV EDXe IP20

- compact LED driver- Constant Voltage (CV)- Electronic short-circuit protection: reversible- protection against "idle"- SELV (Safety Extra Low Voltage)- IP 20

SLC Power Supply CV 24V 50W AM Trailing Edge

50W power supply with built-in AM dimmer. Dimmed with phase-cut / section. Mono.

SLC Power Supply CV 24V 50W DALI DT6 1CH

DALI DT6 50W dimmable constant voltage LED driver with 1 channel 24VDC output.

SLC Power Supply CV 24V 50W PWM 1-10V

50W power supply with 1-10V current-controlled PWM-dimming. Compatible with all types of 1-10V signal and controllers. Can also be controlled with PushDim

SLC SmartOne Power Supply CV 24V 50W Mono Zigbee

Mono 24V, PSU with built-in PWM dimmerBased on the latest Zigbee 3.0 protocolWorks stand-alone when connecting a push switch or wirelessly via TouchLink to a remote control/switchSupports TouchLink communication with Zigbee remotes and switchesCompatible with most smart home systems

SLC SmartOne Zigbee Controller CV 5x4A 12-24V Mono/TW/RGB/RGBW

• 24V Controller 5x4A with PWM dimmer• Based on the latest Zigbee 3.0 protocol• Supports TouchLink communication with Zigbee remotes and switchesBuilt-in dip switch to change between Mono, Tunable White, RGB, RGBW and RGB + TW• Compatible with most smart home systems