To top

SLC One360 Downlight R68-83

One downlight for all applications! Tilts 30° in all directions (360°). For new and rehab projects. Can be mounted into insulation, up to the moisture barrier.

See variants

See document archive
Number Name Price Stock
NumberSLC1120 NameSLC ONE 360 R68-83 WH 705TED 927 IP44 36° Price

incl. VAT

See variant
NumberSLC1123 NameSLC ONE 360 R68-83 BL 715TED 930 IP44 36° Price

incl. VAT

See variant
NumberSLC1122 NameSLC ONE 360 R68-83 BL 695TED 927 IP44 36° Price

incl. VAT

See variant
NumberSLC1121 NameSLC ONE 360 R68-83 WH 710TED 930 IP44 36° Price

incl. VAT

See variant
NumberSLC1146 NameSLC ONE 360 R68-83 ALU 625TED 927 IP44 36° Price

incl. VAT

See variant
NumberSLC1147 NameSLC ONE 360 R68-83 ALU 640TED 930 IP44 36° Price

incl. VAT

See variant
Light technic
Beam angle 36 °, Medium beam 21-40° °
Colour rendering index (CRI/Ra) 90
Type of light source LED
MacAdam (SDCM) 3
Rotate 30 °
Tilt-able 360 °
Reflector High-gloss
Colour rendering index CRI 90-100
Lamp type LED not exchangeable
Light outlet Direct
Light sharing Symmetric
With light source Yes
Colour of light White
Rated life time L80/B10 at 25 °C 50000 Hours
Colour consistency (McAdam ellipse) SDCM3
Light distributor Reflector
Luminaire efficacy 75 lm/W
Energy efficiency class of the built-in lamp A++, A+, A (LED)
Technical data
Type of control signal Trailing Edge
Dimmable Yes
Dimming range 1-100% %
Driver output current 180 mA
IP class IP44
Operating temperature -10°C ~ +45°C °C
Protection class II
Surface protection Powder coating
Type of control gear LED operating device current-controlled
Material housing Aluminium
Material cover Plastic, transparent
Degree of protection (IP) IP44
Control gear included Yes
Max. system power 8 W
Adjustability Rotating and swivelling
Rated ambient temperature according to IEC62722-2-1 -10 - 45 °C
Dimming phase cut-off Yes
Power factor 0.9
Dimming method Trailing edge
Electrical connection (Input) L`L`N`N quick connection
Voltage type AC/DC
Strain relief Yes
Nominal voltage 220 - 240 V
LED nominal current at constant current 180 - 180 mA
Cut-out hole (Ø) 68-83 mm
Built-in width 67 mm
Height 45.4 mm
Built-in height/depth 46 mm
Length 90 mm
Width 90 mm
Installation depth 46 mm
Can be installed directly into the insulation Yes
Type of installation Recessed
Outer diameter 90 mm
Conductor cross section 0.35 mm2
Connection type Plug clamp
Built-in diameter 68 mm
Suitable for suspended mounting No
Number of poles 3
Suitable for wall mounting No
Suitable for built-in mounting Yes
Connectable conductor cross section 0.75 - 2.5 mm²
Type of wiring Suitable for through wiring
Suitable for ceiling mounting Yes
logistics data
Pcs carton 50
D-pack height 23.2 cm
D-pack width 53.5 cm
Product gross weight 350 g
Imported by The Light Group
D-pack gross weight 20 kg
Product gross length 111 mm
D-pack lenght 52 cm
Brand SLC
Product gross width 101 mm
Product gross height 102 mm
General data
Pallet length 1200 mm
M-pack length 535 mm
F-pack length 100 mm
Quick and easy installation
We have always been thinking about electricians when developing our products. Focusing on solutions which is practical and easy for the installer. One 360º and OneSoft comes with a quick connector between the downlight and driver so you can easily detach the downlight from the driver. We also use quick connection boxes with strain relief and connection for tubes.

One downlight for indoor and outdoor use
We have created a downlight which is suitable for outdoor and indoor use. The downlight is not 100% water sealed, but it is resistant enough to be used outdoors (IP44).

Perfect for rehab projects
We created a downlight for all existing cut-out holes from 68-83 mm. This, combined with a low installation height of just 46 mm, makes this downlight perfect for replacing old halogen downlights. You can also install these downlights directly into the insulation.

• SLC One360° for new and rehab projects
• Can be mounted into insulation, up to the moisture barrier
• No installation box required
• Tilts 30° in all directions (360°)
• Suitable for outside installation
• Quick Connection
• 16 mm Cable/Tube connection


DALI2 CC multi dimmer for the One Downlight Series. DALI2 Certified LED Driver. AC PushDim. Analogue flicker-free dimming.

SLC OneSoft Deco Box

Deco Box for SLC One Soft downlights. Decorative cover that is easy to install with the One Soft downlights. Also reduced glare. Height: 60 mm. Width: 93,5 mm. Cut out-hole: 70 mm