To top

SLC One360 Downlight R68-83 (Without Driver)

One360° Downlight Base without a driver. Please also choose your preferred driver. Tilts 30° in all directions (360°). Can be mounted into insulation, up to the moisture barrier

See variants

See document archive
dr_SLC
Number Name Price Stock
NumberSLC1134 NameSLC One360 R68-83 BL 550-1030LM 927 IP44 36° Price

incl. VAT

Stock
See variant
NumberSLC1133 NameSLC One360 R68-83 WH 640-1030LM 930 IP44 36° Price

incl. VAT

Stock
See variant
NumberSLC1132 NameSLC One360 R68-83 WH 600-1030LM 927 IP44 36° Price

incl. VAT

Stock
See variant
NumberSLC1135 NameSLC One360 R68-83 BL 560-1020LM 930 IP44 36° Price

incl. VAT

Stock
See variant
Light technic
Beam angle 36 °, Medium beam 21-40° °
Colour rendering index (CRI/Ra) 90
Type of light source LED
MacAdam (SDCM) 3
Rotate 360 °
Tilt-able 30 °
Reflector High-gloss
Colour rendering index CRI 90-100
Lamp type LED not exchangeable
Light outlet Direct
Light sharing Symmetric
With light source Yes
Colour of light White
Rated life time L80/B10 at 25 °C 50000 Hours
Colour consistency (McAdam ellipse) SDCM3
Light distributor Reflector
Energy efficiency class of the built-in lamp A++, A+, A (LED)
Technical data
CE Yes
Dimmable Yes
Dimming range 1-100% %
IP class IP44
Operating temperature -10°C ~ +45°C °C
RoHs Yes
Protection class II
Surface protection Powder coating
Type of control gear LED operating device current-controlled
Material housing Aluminium
Material cover Plastic, transparent
Degree of protection (IP) IP44
Max. system power 8 W
Adjustability Rotating and swivelling
Rated ambient temperature according to IEC62722-2-1 -10 - 40 °C
Dimming phase cut-off Yes
Dimming depending on control gear Yes
Power factor 0.9
Input
Electrical connection (Input) L`N quick connection
Voltage type DC
Nominal voltage 18 - 38 V
Output
LED nominal current at constant current 180 - 300 mA
Installation
Cut-out hole (Ø) 68-83 mm
Height/depth 46 mm
Built-in width 68 mm
Height 46 mm
Built-in height/depth 46 mm
Length 90 mm
Width 90 mm, 90 mm
Installation depth 46 mm
Can be installed directly into the insulation Yes
Type of installation Recessed
Outer diameter 90 mm
Conductor cross section 0.35 mm2
Connection type Plug clamp
Built-in diameter 68 mm
Suitable for suspended mounting No
Number of poles 3
Suitable for wall mounting No
Suitable for built-in mounting Yes
Connectable conductor cross section 0.75 - 2.5 mm²
Type of wiring Suitable for through wiring
Suitable for ceiling mounting Yes
logistics data
Imported by The Light Group
Brand SLC
One360° Downlight delivered without a driver. Please choose your preferred driver according to specifications.

Quick and easy installation
We have always been thinking about electrician when developing our products. Focusing on solutions which is practical and easy for the installer. One 360º and OneSoft comes with a quick connector between the downlight and driver so you can easily detach the downlight from the driver. We also use quick connection boxes with strain relief and connection for tubes.

One downlight for indoor and outdoor use
We have created a downlight which is suitable for outdoor and indoor use. The downlight is not 100% water sealed, but it is resistant enough to be used outdoors (IP44).

Perfect for rehab projects
We created a downlight for all existing cut-out holes from 68-83 mm. This, combined with a low installation height of just 46 mm, makes this downlight perfect for replacing old halogen downlights. You can also install these downlights directly into the insulation.

• SLC One360° for new and rehab projects
• Can be mounted into insulation, up to the moisture barrier
• No installation box required
• Tilts 30° in all directions (360°)
• Suitable for outside installation
• Quick Connection
• 16 mm Cable/Tube connection