OneSoft Downlight R68-83 TED
One downlight for all applications! Deep recessed LED for low glare. For new and rehab projects. Can be mounted into insulation, up to the moisture barrier.
See variants
See document archive
| Number | Name | Price | Stock | |||
| NumberSLC1127 | NameONE SOFT R68-83 BL 480TED 930 IP44 36° |
Price
incl. VAT |
Stock |
|
|
See variant
|
| NumberSLC1124 | NameONE SOFT R68-83 WH 570TED 927 IP44 36° |
Price
incl. VAT |
Stock |
|
|
See variant
|
| NumberSLC1126 | NameONE SOFT R68-83 BL 470TED 927 IP44 36° |
Price
incl. VAT |
Stock |
|
|
See variant
|
| NumberSLC1125 | NameONE SOFT R68-83 WH 580TED 930 IP44 36° |
Price
incl. VAT |
Stock |
|
|
See variant
|
| Light technic | |
|---|---|
| Beam angle | 36 °, Medium beam 21-40° ° |
| Colour rendering index (CRI/Ra) | 90 |
| Type of light source | LED |
| MacAdam (SDCM) | 3 |
| Reflector | High-gloss |
| Colour rendering index CRI | 90-100 |
| Lamp type | LED not exchangeable |
| Light outlet | Direct |
| Light sharing | Symmetric |
| With light source | Yes |
| Colour of light | White |
| Rated life time L80/B10 at 25 °C | 50000 Hours |
| Colour consistency (McAdam ellipse) | SDCM3 |
| Light distributor | Reflector |
| Energy efficiency class of the built-in lamp | A++, A+, A (LED) |
| Technical data | |
|---|---|
| Type of control signal | Trailing Edge |
| Dimmable | Yes |
| Dimming range | 1-100% % |
| Driver output current | 180 mA |
| IP class | IP44 |
| Operating temperature | -10°C ~ +45°C °C |
| Protection class | II |
| Surface protection | Powder coating |
| Suitable for lamp power | 8 - 8 |
| Type of control gear | LED operating device current-controlled |
| Material housing | Aluminium |
| Material cover | Plastic, transparent |
| Degree of protection (IP) | IP44 |
| Control gear included | Yes |
| Max. system power | 8 W |
| Adjustability | Not adjustable |
| Rated ambient temperature according to IEC62722-2-1 | -10 - 40 °C |
| Dimming phase cut-off | Yes |
| Power factor | 0.9 |
| Input | |
|---|---|
| Electrical connection (Input) | L`L`N`N quick connection |
| Voltage type | AC/DC |
| Strain relief | Yes |
| Nominal voltage | 220 - 240 V |
| Output | |
|---|---|
| LED nominal current at constant current | 180 - 180 mA |
| Installation | |
|---|---|
| Cut-out hole (Ø) | 68-83 mm |
| Height/depth | 46 mm |
| Built-in width | 67 mm |
| Height | 45.4 mm |
| Built-in height/depth | 46 mm |
| Length | 90 mm |
| Width | 90 mm |
| Installation depth | 46 mm |
| Can be installed directly into the insulation | Yes |
| Type of installation | Recessed |
| Outer diameter | 90 mm |
| Conductor cross section | 0.35 mm2 |
| Connection type | Plug clamp |
| Built-in diameter | 68 mm |
| Number of poles | 3 |
| Suitable for built-in mounting | Yes |
| Connectable conductor cross section | 0.75 - 2.5 mm² |
| Type of wiring | Suitable for through wiring |
| logistics data | |
|---|---|
| Pcs carton | 50 |
| D-pack height | 23.2 cm |
| D-pack width | 53.5 cm |
| Product gross weight | 350 g |
| Imported by | The Light Group |
| D-pack gross weight | 20 kg |
| Product gross length | 111 mm |
| D-pack lenght | 52 cm |
| Brand | SLC |
| Product gross width | 101 mm |
| Product gross height | 102 mm |
| General data | |
|---|---|
| Pallet length | 1200 mm |
| M-pack length | 535 mm |
| Rated power | 8 W |
| F-pack length | 100 mm |
Quick and easy installation
We have always been thinking about the electrician when developing our products. Focusing on solutions which is practical and easy for the installer. One 360º and OneSoft comes with a quick connector between the downlight and driver so you can easy detach the downlight from the driver. We also use quick connection boxes with strain relief and connection for tubes.
One downlight for indoor and outdoor use
We have created a downlight which is suitable for outdoor and indoor use. The downlight is not 100% water sealed but it is resistant enough to be used outdoors (IP44).
Perfect for rehab projects
We created a downlight for all excisting cut-out holes from 68-83 mm. This combined with low installation height of just 46 mm, makes this downlight perfect for replacing old halogene downlights. You can also install these downlights directly into the insulation.
• SLC OneSoft for new and rehab projects
• Can be mounted into insulation, up to the moisture barrier
• No installation box required
• Deep recessed LED, low glare
• Suitable for outside installation
• Quick Connection
• 16 mm Cable/Tube connection
We have always been thinking about the electrician when developing our products. Focusing on solutions which is practical and easy for the installer. One 360º and OneSoft comes with a quick connector between the downlight and driver so you can easy detach the downlight from the driver. We also use quick connection boxes with strain relief and connection for tubes.
One downlight for indoor and outdoor use
We have created a downlight which is suitable for outdoor and indoor use. The downlight is not 100% water sealed but it is resistant enough to be used outdoors (IP44).
Perfect for rehab projects
We created a downlight for all excisting cut-out holes from 68-83 mm. This combined with low installation height of just 46 mm, makes this downlight perfect for replacing old halogene downlights. You can also install these downlights directly into the insulation.
• SLC OneSoft for new and rehab projects
• Can be mounted into insulation, up to the moisture barrier
• No installation box required
• Deep recessed LED, low glare
• Suitable for outside installation
• Quick Connection
• 16 mm Cable/Tube connection