SLC Power Supply CV 24V 50W PWM 1-10V
50W power supply with 1-10V current-controlled PWM-dimming. Compatible with all types of 1-10V signal and controllers. Can also be controlled with PushDim
incl. VAT
See document archive
SKU: S32041
Stock:

Technical data | |
---|---|
Exterior color | White |
Operating temperature | -20°C ~ +45°C °C |
Expected lifetime (Ta 45°C) | 50000 Hours |
Over temperature protection | Yes |
Over voltage protection | Yes |
Short circuit protection | Yes |
Protection class | II |
Housing | Plastic housing |
Degree of protection (IP) | IP20 |
Suitable for constant current | No |
Suitable for constant voltage | Yes |
Dimming 0-10 V | No |
Dimming 1-10 V | Yes |
Dimming DALI | No |
Dimming DMX | No |
Dimming potentiometer (integrated) | No |
Dimming LineSwitch | No |
Dimming manufacturer's proprietary system | No |
Dimming mains voltage modulation | No |
Dimming phase cut-off | No |
Dimming phase cut-on | No |
Dimming programmable | No |
Dimming RF | No |
Dimming Sine Wave Reduction | No |
Dimming Touch and Dim | No |
Dimming Zigbee | No |
Dimming with push-button | Yes |
No dim function | No |
Dimming DSI | No |
Dimming method | Pulse Width Modulation (PWM) |
Dimming interface | PushDim |
Input | |
---|---|
Electrical connection (Input) | L`N screw connection |
Power factor | 0.95 |
Input voltage | [200.0, 240.0] V |
Strain relief | Yes |
Frequency range | [50.0, 60.0] Hz |
Output | |
---|---|
RGBW | No |
Output power | 5.0 - 50.0 W |
Output type | Constant voltage (CV) |
RGB | No |
Output power per channel | [5.0, 50.0] W |
Max total output power | 50 W |
Output voltage | 24.0 - 24.0 V |
Output current | 208.0 - 2080.0 mA |
Electrical connection (Out) | L`N quick connection |
Mono | Yes |
Tunable White | No |
Number of LED Output Channels | 1 |
Installation | |
---|---|
Length | 210 mm |
Height | 32 mm |
Width | 50 mm |
Model | Static |
Suitable for outdoor use | No |
logistics data | |
---|---|
Imported by | The Light Group |
Brand | SLC |
General data | |
---|---|
GTIN | 7070938057332 |
50W power supply with 1-10V current-controlled PWM-dimming. Compatible with all types of 1-10V signal and controllers. Can also be controlled with PushDim
Protection against overload, short circuit and overheating. For 24V LED-strips and other products with 24V operating voltage
Protection against overload, short circuit and overheating. For 24V LED-strips and other products with 24V operating voltage