To top

SLC DALI DT8 Controller 12-36V CV 4x5A OLED Master-Slave

Unique DALI DT8 12-36V controller with integrated DALI master function. Comes with OLED display interface for easy and fast programmer directly on the device. Support for all DT8 colour types in the same unit (DALI DT8 Color Protocol: XY, Tc, Primary-N and RGBWAF). Cost and time-saving solution with virtually unlimited possibilities.

incl. VAT


See document archive
SKU: S23026
Stock:
Technical data
Number of DALI-address 1
DALI-bus power consumption 2 mA
CE Yes
Exterior color White
Operating temperature -20°C ~ +45°C °C
Protection class II
Housing Plastic housing
Programmable Yes
Degree of protection (IP) IP20
Number of colour channels 4
Operating method DALI
Dimming interface DALI DT8
Input
Electrical connection (Input) L`N quick connection
Input voltage 12.0 - 36.0 V
Output
Max. output current 20 A
Output voltage 12.0 - 36.0 V
Installation
Length 170 mm
Height 28 mm
Width 53.4 mm
Model Dynamic
Surface-mounted Yes
Suitable for outdoor use No
logistics data
Imported by The Light Group
Brand SLC
D-Pak
D-pack length 380 mm
D-pack weight 12900 g
D-pack height/diameter 280 mm
D-pack quantity 70 pcs
D-pack width 270 mm
F-Pak
F-pack width 53.4 mm
F-pack height 28 mm
F-pack weight 160 g
F-pack length 170 mm
M-Pak
M-pack weight 170 g
M-pack height 55 mm
M-pack width 33 mm
M-pack length 173 mm
Number 1
• DALI DT8 dimmer, 4 channels PWM output, built-in DALI master function
• OLED display interface, easy & fast installation
• No DALI master required for configuration
• Cost & time saving than DALI USB configuration
• DT8 colour types all in one: XY, Tc, RGBWA, XY+Tc and RGB+Tc settable
• Each device is controlled via a single DALI address
• Enable to address and group the DT8 device
• Enable to predefine & recall 16 scenes for the DT8 device
• 250Hz/500Hz/1500Hz PWM frequency settable, smooth and fine DT8 colour control
• Enables to set a min. level for dimming between this level to the max. level
• Enable to set output level and manual control (stand-alone)
• Enables to set fade time, fade rate, power on level, system failure level
• Compatible with universal DALI masters that support DT8 commands.
• Complies to IEC 62386-209: 2011