To top

SLC SmartOne Zigbee to DALI DT8/1-10V Converter Mono/TW/RGB/RGB+TW

• Zigbee to DALI Converter that easily lets you integrate your DALI or 1-10V system against Zigbee• Zigbee to DALI or 1-10V signal converter• Mono, Tunable White, RGB and RGBW• DALI DT6: Mono dim• DALI DT8: TW, RGB, RGBW• Can address DALI addresses, DALI groups, and Broadcast• Switch for disconnecting• Built-in DALI power supply• Based on the latest Zigbee 3.0 protocol• Supports TouchLink communication with other Zigbeedevices

incl. VAT


See document archive
SKU: S24021
Stock:
Technical data
DALI version DALI
DALI Type DT8
DALI DT8 Color Management Protocol RGBWAF
Exterior color White
Operating temperature -20°C ~ +45°C °C
Protection class II
Housing Plastic housing
Degree of protection (IP) IP20
Suitable for constant current Yes
Suitable for constant voltage Yes
Dimming 1-10 V Yes
Dimming DALI Yes
Dimming Zigbee Yes
Dimming interface PushDim
Input
Strain relief Yes
Output
RGBW Yes
RGB Yes
Mono Yes
Tunable White Yes
logistics data
Brand SLC
Imported by The Light Group
D-Pak
D-pack length 380 mm
D-pack width 270 mm
D-pack weight 8000 g
D-pack height/diameter 280 mm
D-pack quantity 100 pcs
M-Pak
M-pack length 132 mm
M-pack weight 70 g
M-pack height 45 mm
Number 1
M-pack width 25 mm
F-Pak
F-pack width 37 mm
F-pack weight 60 g
F-pack length 95 mm
F-pack height 20 mm
• Zigbee to DALI+0/1-10V 2 in 1 converter based on Zigbee 3.0
• Zigbee signal input, DALI signal output to DALI line or 0/1-10V signal output, 110-240VAC power input
• With max. 5A relay output and metering function
• Compatible with universal Zigbee gateway or hub products
• Can directly pair to a compatible ZigBee remote via Touchlink
• Compatible with universal Zigbee remotes
• Supports self-forming Zigbee network without a coordinator
• Supports find and bind mode to bind a ZigBee remote
• Supports Zigbee green power and can link max. 20 Zigbee green power remotes
• DALI signal or 1-10V signal output selectable by DIP switch
• Built-in DALI bus power supply, no extra DALI bus PS required
• With max. 50mA DALI bus power current output
• To supply control current to up to 25 DALI control gears
• DALI DT6 or DT8 device type selectable by DIP switch under DALI mode
• Color control according to DALI specifications of Device Type 8,
• Color type: Tc, XY coordinates, RGBW selectable by DIP switches
• DALI address control mode or group control mode selectable by DIP switch

SLC SmartOne Zigbee Remote Mono

• Remote control with three channels• Based on the latest Zigbee 3.0 protocol that supports Touchlink communication with Zigbee devices• Can control 3 units/groups• Possibility to program four scenes• Can be attached surface to wall• Battery-powered (CR2430)
S57007
 

SLC SmartOne Zigbee Wall Remote 1 x Mono

• Wireless wall switch with two buttons• Can be mounted surface-mounted on a wall• Based on the latest Zigbee 3.0 protocol which supports Touchlink communication with Zigbee devices• Can also be used as a mode switch with a hub• Battery-powered• Fits in 55x55 mm frame
S57001
 

SLC SmartOne Zigbee Wall Remote 4 x Mono

• Wireless wall switch with 8 buttons• Can be mounted surface-mounted on a wall• Based on the latest Zigbee 3.0 protocol• which supports Touchlink communication with Zigbee devices• Can also be used as a mode switch with hub• Battery powered• Fits in 55x55 mm frame
S57003