SLC RF to Trailing Edge AC Controller 2x1,2A
RF to Trailing edge dimmer with strain relief and reliable full isolation design. 2 x outputs and minimum brightness setting function.
incl. VAT
See document archive
SKU: S21006
Stock:
Technical data | |
---|---|
Exterior color | White |
Operating temperature | -20°C ~ +45°C °C |
Method of operation | Radio frequency (RF) |
Colour | White |
Surface protection | Other |
Material quality | Other |
Type of load | Universal and LED Retrofit |
Material | Plastic |
Light value memory | Yes |
Applicable with movement sensor | Yes |
Applicable with presence indicator | Yes |
Applicable with time switch/timer | Yes |
Surface finishing | Matt |
Dimming phase cut-off | Yes |
Dimming phase cut-on | Yes |
Dimming interface | Trailing edge |
Input | |
---|---|
Nominal voltage | 100.0 - 240.0 V |
Installation | |
---|---|
Mounting method | Built-in installation |
Connection type | Screwed terminal |
Type of fastening | Mounting with screw |
Core cross section | 0.5 - 2.5 mm² |
Width of device | 170 mm |
Height of device | 29 mm |
Depth of device | 59 mm |
logistics data | |
---|---|
Brand | SLC |
General data | |
---|---|
Assembly arrangement | Other |
Suitable for degree of protection (IP) | IP20 |
• Safe and reliable full isolation design
• 220-240VAC input and 220-240VAC output
• 2 channel, maximum 1.2A per channel output
• Trailing edge dimming
• Great compatibility with a variety of SLC RF mono remote and wall-mounted controllers
• Can be WiFi controlled via APP installed on IOS mobile devices
• Innovative minimum brightness setting function
• To dim dimmable LED lamps, traditional incandescent and halogen lights.
The dimmer switch is both Triac dimmable and mosfet dimmable and comes with 2 channels and maximum 1.2A per channel output. The total output power of two channels can be up to 576W which enables you to connect enough LED lights. The innovative minimum brightness setting function enables users to set a minimum brightness and dim from this minimum brightness to 100% brightness. Also, it is easy to delete the minimum brightness. This AC LED dimmer switch adopts popular phase-cut dimming technology including both forward phase-cut dimming and reverse phase-cut dimming.
With a built-in RF control interface, this Triac dimmer switch receives RF signal and can be controlled by remote or wall-mounted RF senders.
It is compatible with a variety of SLC RF series remote and wall-mounted controllers. While working with a WiFi-RF converter, the AC dimmer can be WiFi controlled via APP installed on IOS mobile devices.
• 220-240VAC input and 220-240VAC output
• 2 channel, maximum 1.2A per channel output
• Trailing edge dimming
• Great compatibility with a variety of SLC RF mono remote and wall-mounted controllers
• Can be WiFi controlled via APP installed on IOS mobile devices
• Innovative minimum brightness setting function
• To dim dimmable LED lamps, traditional incandescent and halogen lights.
The dimmer switch is both Triac dimmable and mosfet dimmable and comes with 2 channels and maximum 1.2A per channel output. The total output power of two channels can be up to 576W which enables you to connect enough LED lights. The innovative minimum brightness setting function enables users to set a minimum brightness and dim from this minimum brightness to 100% brightness. Also, it is easy to delete the minimum brightness. This AC LED dimmer switch adopts popular phase-cut dimming technology including both forward phase-cut dimming and reverse phase-cut dimming.
With a built-in RF control interface, this Triac dimmer switch receives RF signal and can be controlled by remote or wall-mounted RF senders.
It is compatible with a variety of SLC RF series remote and wall-mounted controllers. While working with a WiFi-RF converter, the AC dimmer can be WiFi controlled via APP installed on IOS mobile devices.