To top

SLC LED STRIP ALine MONO CV 120 5m 8mm 9,6W 780lm 4000K CRI80 IP54

Our latest project strip with good light output and low power. Suitable for most installations as direct, design and background lighting. 120 LEDs per meter makes it easier to create an even light line in most installations. Must be laid in profile for cooling to ensure longevity. With double-sided 3M tape, the strip is versatile and easy to install.

incl. VAT

Back to product variants

See document archive
SKU: S11075
Light technic
Expected lifetime 50 000
Number of LED`s per meter 120
Light reduction L70B50
MacAdam (SDCM) 3
Beam angle 120
Colour rendering index CRI 80-89
Lamp type LED not exchangeable
Lamp power per meter 9.6 W/m
Number of nodes per meter 120 LED`s
Colour temperature 4000.0 - 4000.0 K
Colour of light White
Luminous flux per meter 780 lm/m
Rated life time L70/B50 at 25 °C 50000 Hours
Luminaire efficacy 81.3 lm/W
Technical data
Cutting point, every 50 mm
Dimmable Yes, with PWM or AM
LED-Strip length 5 m
Max length per connection: 5 meter m
Operating temperature -20°C ~ +45°C °C
Rated power per meter 9.6 W/m
Protection class III
Type of control gear LED operating device voltage-controlled
Suitable for dimmer Yes
Degree of protection (IP) IP54
Lamp voltage 24.0 - 24.0 V
Max. system power 48 W
Technology Constant voltage (CV)
Electrical connection (Input) 2 meter wire in each end
Voltage type DC
Length of particular segments 50 mm
Height/depth 2 mm
Length 5000 mm
Width 8 mm
Mounting method Surface mounting/recessed mounting
Model Strip
Conductor cross section 0.35 mm2
Connection type Solder
Self-adhesive Yes
Number of poles 2
Lowest bending radius 40 mm
With connection set Yes
Type of wiring Ending
logistics data
Imported by The Light Group
Brand SLC
D-pack length 550 mm
D-pack weight 14400 g
D-pack height/diameter 450 mm
D-pack quantity 40 pcs
D-pack width 290 mm
F-pack width 260 mm
F-pack height 18 mm
F-pack weight 330 g
F-pack length 270 mm
M-pack weight 3600 g
M-pack height 250 mm
M-pack width 220 mm
M-pack length 260 mm
Number 10
EPREL Energy Class F
General data
Rated power 48 W
It's recommended to install the LED-Strip in an aluminium profile to ensure the cooling and long product lifetime. 3Ms adhesive tape on the backside of the LED-Strips provides easy and quick installation. Available in many colour temperatures and IP-rating options. The LED-Strip comes with a 2-meter connection cable at each end. Can also be ordered in a custom length.

SLC LogiQ LED Driver CV 12VDC 50W 2CH

LogiQ Constant Voltage 12V dimmable 2 channel driver for LED luminaries. Works with multiple control modules: DALI (DT6/DT8), DMX/RDM, RF, 1-10V, ZigBee, Z-Wave (see accessories or plugin modules).

SLC Power Supply 60W 24V CV EDXe IP20

- compact LED driver- Constant Voltage (CV)- Electronic short-circuit protection: reversible- protection against "idle"- SELV (Safety Extra Low Voltage)- IP 20

SLC Power Supply CV 24V 50W AM Trailing Edge

50W power supply with built-in AM dimmer. Dimmed with phase-cut / section. Mono.

SLC Power Supply CV 24V 50W DALI DT6 1CH

DALI DT6 50W dimmable constant voltage LED driver with 1 channel 24VDC output.

SLC Power Supply CV 24V 50W PWM 1-10V

50W power supply with 1-10V current-controlled PWM-dimming. Compatible with all types of 1-10V signal and controllers. Can also be controlled with PushDim

SLC SmartOne Power Supply CV 24V 50W Mono Zigbee

Mono 24V, PSU with built-in PWM dimmerBased on the latest Zigbee 3.0 protocolWorks stand-alone when connecting a push switch or wirelessly via TouchLink to a remote control/switchSupports TouchLink communication with Zigbee remotes and switchesCompatible with most smart home systems

SLC SmartOne Zigbee Controller CV 5x4A 12-24V Mono/TW/RGB/RGBW

• 24V Controller 5x4A with PWM dimmer• Based on the latest Zigbee 3.0 protocol• Supports TouchLink communication with Zigbee remotes and switchesBuilt-in dip switch to change between Mono, Tunable White, RGB, RGBW and RGB + TW• Compatible with most smart home systems