To top

SLC NEON FLEX MAINS TOP 1-50M 21MM 8W 440LM 3000K CRI80 IP65

230V Neon Flex is an LED strip that can run up to 50 meters per connection. Top bend. Dimmable. No need for a driver. UV and saltwater resistant. Sold to measure only. Produced in 20 centimeter intervals.

incl. VAT

Back to product variants

See document archive
SKU: Sm17211
Stock:
Light technic
Colour rendering index (CRI/Ra) 80
MacAdam (SDCM) 3
Beam angle 120
Colour rendering index CRI 80-89
Lamp type LED not exchangeable
Lamp power per meter 8 W/m
Number of nodes per meter 140 LED`s
Colour temperature 3000.0 - 3000.0 K
Colour of light White
Luminous flux per meter 440 lm/m
Rated life time L70/B50 at 25 °C 50000 Hours
Luminaire efficacy 55 lm/W
Technical data
CE Yes
Exterior color White
Cutting point, every 200 mm
Dimmable Yes
Max length per connection: 50 meter m
Operating temperature -25°C ~ +35°C °C
Protection class II
Type of control gear Not required
Suitable for dimmer Yes
Degree of protection (IP) IP65
Lamp voltage 220.0 - 240.0 V
Max. system power 400 W
Power factor 0.9
Input
Voltage type AC
Installation
Length of particular segments 200 mm
Height/depth 15 mm
Length 50000 mm
Width 21 mm
Mounting method Surface mounting/recessed mounting
Model Hose
Conductor cross section 1.5 mm2
Number of poles 2
With protective cover Yes
Lowest bending radius 120 mm
With connection set Yes
With end piece Yes
Type of wiring Ending
logistics data
Imported by The Light Group
Brand SLC
This product is produced in custom lengths, with increments of 20 cm and a 1,5 m cable with Schuko (IP65) plug.

SLC Brackets for MAINS NEON FLEX TopBend 230V

Kit with two brackets and two screws for mounting the SLC Mains NEON FLEX TopBend.
S17293
 

SLC Clips for MAINS NEON FLEX TopBend 230V

Kit with two clips and two screws for mounting the SLC Mains NEON FLEX TopBend.
S17292
 

SLC Profile 1m for MAINS NEON FLEX TopBend 230V

1m Aluminium profile for mounting the SLC Mains NEON FLEX TopBend.
S17294