To top

SLC RF/AC-PushDim to DALI DT8 TW Converter

RF for DALI Group and Scene Controller. Controlled by RF wall panel / remote control and converts the signal to DALI bus. Programmed for 1 DALI group or as broadcast. For Tunable White light sources.

incl. VAT


See document archive
SKU: S21023
Stock:
Technical data
Number of DALI-address 1
DALI-bus power consumption 8 mA
Exterior color White
Operating temperature 0°C ~ +40°C °C
Protection class II
Housing Plastic housing
Degree of protection (IP) IP20
Suitable for constant current Yes
Suitable for constant voltage Yes
Dimming 0-10 V No
Dimming 1-10 V No
Dimming DALI Yes
Dimming DMX No
Dimming potentiometer (integrated) No
Dimming LineSwitch No
Dimming manufacturer's proprietary system No
Dimming mains voltage modulation No
Dimming phase cut-off No
Dimming phase cut-on No
Dimming programmable No
Dimming RF Yes
Dimming Sine Wave Reduction No
Dimming Touch and Dim No
Dimming Zigbee No
Dimming with push-button Yes
No dim function No
Dimming DSI No
Dimming interface AC-Push
Input
Electrical connection (Input) L`N screw connection
Installation
Length 46 mm
Height 20.5 mm
Width 45 mm
Model Static
Suitable for outdoor use No
logistics data
Brand SLC
• RF to DALI Group & Scene Controller
• Receives RF signal and outputs DALI signal to DALI line
• Comply to DALI standard protocol IEC 62386-102, IEC 62386-207, IEC 62386-209
• DT8 for color tuning, color type: Tc, compatible with universal DALI masters that support DT8 commands
• DALI Bus Powered
• Can be controlled by RF remotes and compatible with a variety of CCT RF remotes
• Can be set to any zone of the paired RF remote by a rotary switch
• Can be WiFi controlled while working with a WiFi-RF converter
• Can be controlled by universal 8V-230V input single wire PUSH switch
• Enable to control 1 DALI Group of devices
• Enable to control all devices on DALI line via broadcast
• The number of DALI Scenes to be controlled depends on the paired RF remote
• Enable to set starting number (0-15) of DALI groups to be controlled by a rotary switch
• Enable to set starting number (0-15) of DALI scenes to be controlled by a rotary switch
• Each DALI line can install multiple controllers for multi control points