To top

SLC SmartOne Zigbee CC Driver CC 1CH 30W 250-1000mA MONO

Dimmable LED driver, ZigBee device based on ZigBee 3.0 protocolMax. output power 30W total, 1 channel 250-1000mA constant current outputDips to select multi-operation current: 250-1000mA

incl. VAT


See document archive
SKU: S32050
Stock:
Technical data
CE Yes
Exterior color White
EMC Yes
ENEC Yes
Operating temperature -20°C ~ +45°C °C
Over temperature protection Yes
Over voltage protection Yes
SELV Yes
Short circuit protection Yes
Tc 85 °C
Protection class II
Housing Plastic housing
Degree of protection (IP) IP20
Suitable for constant current Yes
Dimming Zigbee Yes
Dimming method Pulse Width Modulation (PWM)
Dimming interface Zigbee
Input
Electrical connection (Input) L`N screw connection
Power factor 0.97
Strain relief Yes
Frequency range [50.0, 60.0] Hz
Inrush Current 2 A
Leakage Current 0.5 mA
Output
Output current 250.0 - 1000.0 mA
Output type Constant current (CC)
Mono Yes
Output voltage 8.0 - 55.0 V
Number of LED Output Channels 1
Installation
Length 170 mm
Height 28 mm
Width 53.4 mm
Model Dynamic
Suitable for outdoor use No
D-Pak
D-pack length 380 mm
D-pack width 270 mm
D-pack weight 15000 g
D-pack height/diameter 280 mm
D-pack quantity 70 pcs
M-Pak
M-pack length 173 mm
M-pack weight 200 g
M-pack height 55 mm
Number 1
M-pack width 33 mm
F-Pak
F-pack width 53.4 mm
F-pack weight 190 g
F-pack length 170 mm
F-pack height 28 mm
Dimmable LED driver, ZigBee device based on ZigBee 3.0 protocol
Max. output power 30W total, 1 channel 250-1000mA constant current output
Dips to select multi-operation current
Class II power supply, full isolated plastic case
Built-in active PFC function, high power factor and efficiency
Amplitude dimming, deep and smooth dimming to 0.1%, flicker-free
(PWM Dimming under 1%)
Enables to control ON/OFF, light intensity
ZigBee end device that supports Touchlink commissioning

SLC SmartOne Zigbee Remote Mono

• Remote control with three channels• Based on the latest Zigbee 3.0 protocol that supports Touchlink communication with Zigbee devices• Can control 3 units/groups• Possibility to program four scenes• Can be attached surface to wall• Battery-powered (CR2430)
S57007
 

SLC SmartOne Zigbee Wall Remote 1 x Mono

• Wireless wall switch with two buttons• Can be mounted surface-mounted on a wall• Based on the latest Zigbee 3.0 protocol which supports Touchlink communication with Zigbee devices• Can also be used as a mode switch with a hub• Battery-powered• Fits in 55x55 mm frame
S57001
 

SLC SmartOne Zigbee Wall Remote 4 x Mono

• Wireless wall switch with 8 buttons• Can be mounted surface-mounted on a wall• Based on the latest Zigbee 3.0 protocol• which supports Touchlink communication with Zigbee devices• Can also be used as a mode switch with hub• Battery powered• Fits in 55x55 mm frame
S57003