SLC LED STRIP 230V 3000K 10M Set
The LED strip is connected directly to 230V and therefore does not need a driver. Can also be dimmed with a phase-section dimmer. Time-saving and efficient solution. Supplied with a pre-fitted plug at one end. Use the end piece at the other end if the strip is cut. Can be used both indoors and outdoors. Mounting options: milled into the substrate, clip or aluminum profile. Comes in 10, 25 and 50 meter rolls.
incl. VAT
Back to product variants
See document archive
SKU: TLG-0350
Stock:
| Light technic | |
|---|---|
| Beam angle | 120 °, 120 |
| Colour rendering index (CRI/Ra) | 80 |
| Expected lifetime | 50 000 |
| Number of LED`s per meter | 80 |
| Light reduction | L70B50 |
| Lumens pr. meter | 850 lm |
| MacAdam (SDCM) | 3 |
| Colour rendering index CRI | 80-89 |
| Lamp type | LED not exchangeable |
| Lamp power per meter | 8 W/m |
| Number of nodes per meter | 80 LED`s |
| Colour temperature | 3000.0 - 3000.0 K |
| Colour of light | White |
| Luminous flux per meter | 850 lm/m |
| Rated life time L70/B50 at 25 °C | 50000 Hours |
| Luminaire efficacy | 106.3 lm/W |
| Technical data | |
|---|---|
| Cutting point, every | 200 mm |
| Dimmable | Yes |
| Max length per connection: | 50 meter m |
| Operating temperature | -20°C ~ +45°C °C |
| Rated power per meter | 8 W/m |
| Type of control gear | Not required |
| Suitable for dimmer | Yes |
| Degree of protection (IP) | IP65 |
| Lamp voltage | 220.0 - 240.0 V |
| Max. system power | 400 W |
| Power factor | 97 |
| Input | |
|---|---|
| Voltage type | AC |
| Installation | |
|---|---|
| Length of particular segments | 200 mm |
| Height/depth | 7 mm |
| Length | 10000 mm |
| Width | 16.5 mm |
| Mounting method | Surface mounting/recessed mounting |
| Model | Strip |
| Number of poles | 2 |
| With protective cover | Yes |
| With connection set | Yes |
| With end piece | Yes |
| Type of wiring | Ending |
| D-Pak | |
|---|---|
| D-pack length | 380 mm |
| D-pack weight | 2500 g |
| D-pack height/diameter | 85 mm |
| D-pack quantity | 1 pcs |
| D-pack width | 390 mm |
| F-Pak | |
|---|---|
| F-pack height | 77 mm |
| F-pack weight | 2300 g |
EMC & CE Certified for up to 50 meters.
Our SLC 230V LED strips can be connected directly to 230V and do not require a driver. Convince yourself of our time-saving and effective solution for your next project.
The SLC 230V 8W LED strip is dimmable with most phase cut dimmers on the market.
It is TÜV-CE /CB and RoHS certified up to 50m thanks to its overvoltage and thermal protection with built-in smart IC driver.
We supply the SLC 230V LED strips on 10m, 25m and 50m reels or individually configured according to your desired length.
- Supplied with a pre-assembled connector at one end
- Can be used both indoors and outdoors IP40 and IP65 versions available
- Mounting options; surface mount, clip mount or aluminum profile mount
Our SLC 230V LED strips can be connected directly to 230V and do not require a driver. Convince yourself of our time-saving and effective solution for your next project.
The SLC 230V 8W LED strip is dimmable with most phase cut dimmers on the market.
It is TÜV-CE /CB and RoHS certified up to 50m thanks to its overvoltage and thermal protection with built-in smart IC driver.
We supply the SLC 230V LED strips on 10m, 25m and 50m reels or individually configured according to your desired length.
- Supplied with a pre-assembled connector at one end
- Can be used both indoors and outdoors IP40 and IP65 versions available
- Mounting options; surface mount, clip mount or aluminum profile mount