To top

SLC LED STRIP 3D MONO CV 3X60 5M 10MM 14,4W 1200LM 3000K CRI80 IP20

3-Way is an LED strip that illuminates both upwards and to both sides. For use in installations where light is required in all directions.

incl. VAT

Back to product variants

See document archive
SKU: S14032
Stock:
Light technic
Beam angle 180
Colour rendering index CRI 80-89
Lamp type LED not exchangeable
Lamp power per meter 14.4 W/m
Number of nodes per meter 180 LED`s
Colour temperature 3000.0 - 3000.0 K
Colour of light White
Luminous flux per meter 1200 lm/m
Lamp power per foot 4.32 W
Luminaire efficacy 83.3 lm/W
Number of nodes per foot 54
Technical data
Cutting point, every 100 mm
IP class IP20
LED-Strip length 5 m
Max length per connection: 5 meter m
Protection class II
Type of control gear LED operating device voltage-controlled
Suitable for dimmer Yes
Degree of protection (IP) IP20
Lamp voltage 24.0 - 24.0 V
Max. system power 72 W
Power factor 0.95
Input
Voltage type DC
Installation
Length of particular segments 100 mm
Height/depth 2 mm
Length 5000 mm
Width 10 mm
Mounting method Surface mounting/recessed mounting
Model Strip
Conductor cross section 0.35 mm2
Connection type Solder
Self-adhesive Yes
Number of poles 2
With protective cover No
Lowest bending radius 20 mm
With connection set No
With end piece No
Type of wiring Ending
logistics data
Imported by The Light Group
Brand SLC
D-Pak
D-pack length 550 mm
D-pack weight 17600 g
D-pack volume 71.775 dm3
D-pack height/diameter 450 mm
D-pack quantity 100 pcs
D-pack width 290 mm
F-Pak
F-pack width 190 mm
F-pack height 12 mm
F-pack weight 170 g
F-pack length 205 mm
M-Pak
M-pack weight 4400 g
M-pack height 250 mm
M-pack width 220 mm
M-pack length 260 mm
Number 25
EPREL Data
EPREL Energy Class F
General data
Pallet length 1200 mm
This LED-strip sends light beam sidewise in both directions and upwards. Good colour rendering, light output and low wattage. Perfect for direct and indirect light, where installation place limits use of other solutions or if you want to illuminate in angles from a single LED-strip. 3Ms adhesive tape on the backside of the strips ensures easy and quick installation. Available in 3 colour temperature options.