To top

SLC LED STRIP 90° MONO CV 120 5M 10MM 9,6W 1080LM 2700K CRI80 IP20

LED strip with adjustable LEDs; each individual LED can be adjusted which way it should light up.

incl. VAT

Back to product variants

See document archive
SKU: S14019
Stock:
Light technic
Beam angle 120
Colour rendering index CRI 80-89
Lamp type LED not exchangeable
Lamp power per meter 9.6 W/m
Number of nodes per meter 120 LED`s
Colour temperature 2700.0 - 2700.0 K
Colour of light White
Luminous flux per meter 1080 lm/m
Rated life time L70/B50 at 25 °C 110000 Hours
Lamp power per foot 4.2 W
Luminaire efficacy 113 lm/W
Number of nodes per foot 36
Technical data
Cutting point, every 50 mm
IP class IP20
LED-Strip length 5 m
Max length per connection: 5 meter m
Protection class II
Type of control gear LED operating device voltage-controlled
Suitable for dimmer Yes
Degree of protection (IP) IP20
Lamp voltage 24.0 - 24.0 V
Max. system power 70 W
Power factor 0.95
Input
Voltage type DC
Installation
Length of particular segments 50 mm
Height/depth 2 mm
Length 5000 mm
Width 10 mm
Mounting method Surface mounting/recessed mounting
Model Strip
Conductor cross section 0.35 mm2
Connection type Solder
Self-adhesive Yes
Number of poles 2
With protective cover No
Lowest bending radius 20 mm
With connection set No
With end piece No
Type of wiring Ending
logistics data
Imported by The Light Group
Brand SLC
D-Pak
D-pack length 550 mm
D-pack weight 17600 g
D-pack volume 71.775 dm3
D-pack height/diameter 450 mm
D-pack quantity 100 pcs
D-pack width 290 mm
F-Pak
F-pack width 190 mm
F-pack height 12 mm
F-pack weight 170 g
F-pack length 205 mm
M-Pak
M-pack weight 4400 g
M-pack height 250 mm
M-pack width 220 mm
M-pack length 260 mm
Number 25
EPREL Data
EPREL Energy Class F
General data
Pallet length 1200 mm
This LED-strip allows you to adjust direction in which each diode emits light. Suitable for installations, where surface which is to be illuminated is not flat, and the angle of light shall not be bigger than 90 degrees. Good colour rendering, light output despite low wattage. 120 LED diodes per meter give smooth and uniform linear light. 3Ms adhesive tape on the backside of the strips ensures easy and quick installation. Available in 3 colour temperature options.

SLC LogiQ LED Driver CV 12VDC 50W 2CH

LogiQ Constant Voltage 12V dimmable 2 channel driver for LED luminaries. Works with multiple control modules: DALI (DT6/DT8), DMX/RDM, RF, 1-10V, ZigBee, Z-Wave (see accessories or plugin modules).
S37011
 

SLC Power Supply 60W 24V CV EDXe IP20

- compact LED driver- Constant Voltage (CV)- Electronic short-circuit protection: reversible- protection against "idle"- SELV (Safety Extra Low Voltage)- IP 20
S32072
 

SLC Power Supply CV 24V 50W AM Trailing Edge

50W power supply with built-in AM dimmer. Dimmed with phase-cut / section. Mono.
S32080
 

SLC Power Supply CV 24V 50W DALI DT6 1CH

DALI DT6 50W dimmable constant voltage LED driver with 1 channel 24VDC output.
S32007
 

SLC Power Supply CV 24V 50W PWM 1-10V

50W power supply with 1-10V current-controlled PWM-dimming. Compatible with all types of 1-10V signal and controllers. Can also be controlled with PushDim
S32041
 

SLC SmartOne Power Supply CV 24V 50W Mono Zigbee

Mono 24V, PSU with built-in PWM dimmerBased on the latest Zigbee 3.0 protocolWorks stand-alone when connecting a push switch or wirelessly via TouchLink to a remote control/switchSupports TouchLink communication with Zigbee remotes and switchesCompatible with most smart home systems
S32053
 

SLC SmartOne Zigbee Controller CV 5x4A 12-24V Mono/TW/RGB/RGBW

• 24V Controller 5x4A with PWM dimmer• Based on the latest Zigbee 3.0 protocol• Supports TouchLink communication with Zigbee remotes and switchesBuilt-in dip switch to change between Mono, Tunable White, RGB, RGBW and RGB + TW• Compatible with most smart home systems
S24018